teray
New Member
Posts: 2
|
Post by teray on Nov 8, 2017 14:55:28 GMT -5
Hello! I've been using the Clear Cast FDA Compliant 2 Part resin for quite a while now and I love it.
Anyhoo, I have a customer who is requesting a copy of the Certificate from the FDA that states the Clear Cast is specifically FDA compliant.
Is there any way we can get that? Or something similar.
Thanks!
Edit: I have searched the forum but didn't see anything specifically about this.
|
|
|
Post by carol - Alumilite Corp on Nov 9, 2017 8:14:00 GMT -5
Teray,
Right next to the Amazing Clear Cast on the website is the information for your customers convenience. FDA CFR 177.2600 is the FDA compliant number they would need.
Have a great day!
Regards,
Carol
|
|
teray
New Member
Posts: 2
|
Post by teray on Nov 9, 2017 9:54:30 GMT -5
Thanks for the reply Carol. I had shown my customer the site and that information. She tells me that without seeing the certificate, or copy of, that shows your product with that compliance, the information on the website can be falsified.
Apparently my customer got ahold of another resin crafter and they are saying the same thing. This is becoming a mess. Anyhoo, thanks again for the response.
No, I will not stop using it as I believe you guys follow that compliance.
|
|
|
Post by carol - Alumilite Corp on Nov 9, 2017 10:05:36 GMT -5
Teray,
Let me see what I can do for you, I am sure we have falsified nothing. We don't have an FDA approval certificate... the chemicals in the formulation are all FDA compliant IF it is measured, mixed, and cured properly according to direction.
I'll be back with you dear.
Warmest Regards,
Carol
|
|
|
Post by Tawny on Nov 16, 2017 19:46:17 GMT -5
Once fully cured, are finished products dishwasher safe? Microwavable?
Thank you
|
|
|
Post by carol - Alumilite Corp on Nov 17, 2017 9:10:13 GMT -5
Tawny,
No the are not either dishwasher or microwavable Tawny. They are not recommended for very hot foods or hot drinks.
Happy Holidays!
Regards,
Carol
|
|
|
Post by tam on Nov 7, 2018 1:21:18 GMT -5
Hello! I've been using the Clear Cast FDA Compliant 2 Part resin for quite a while now and I love it. Anyhoo, I have a customer who is requesting a copy of the Certificate from the FDA that states the Clear Cast is specifically FDA compliant. Is there any way we can get that? Or something similar. Thanks! Edit: I have searched the forum but didn't see anything specifically about this.
|
|
|
Post by tam on Nov 7, 2018 1:22:07 GMT -5
Hello I just started using Alumilite amazing clear cast for tumblers like 2 days ago. While applying the alumilite I use the blue nitrile gloves(double up on gloves) and spread the alumilite with my hand. The cup is then placed on a tumbler turner and in the morning it is dry and hard. I wanted to know
1. if it is safe to touch the cup after 24hrs with your hands?
2. If the cup is still sticky and some epoxy from the cup accidentally gets on your hands, is it ok to wash hands with soap to remove and does this remove it?
3. How long does it take the cup to completely cure?
4. How long should you wait before washing the cup with soap and water?
5. After applying epoxy should the cups be placed outside while they cure? I have been applying epoxy in the apartment in front of the open patio door to let air circulate and with a face mask.
|
|
|
Post by redtail80 on Nov 7, 2018 14:01:54 GMT -5
Hi There,
I'm new to the forum and have a few quick questions, the first one on FDA has been answered!
I am making a large walnut river table 11' x 4' x 2.5' which will require around around 16 gallons to complete the pour. I'm not sure what to pour such a large area with, polyester or polyplopine I'd like to be able to machine and glass polish level with the wood after. The shop is well ventilated and the temperature is a constant 75-80 almost year round, its Florida after all.
If anyone has completed a table pour or has any advise or recommendations on what Alumilite product to use, I'd love to hear from you.
Thanks, Gareth
|
|
|
Post by carol - Alumilite Corp on Nov 16, 2018 13:03:13 GMT -5
Hello Redtail80,
If you go to Bartopcoating.com there is a Coverage Calculator there based on dimensions of the table you are wanting to coat. Our Bar Top Coating/Amazing Clear Cast is used for multiple coating applications, both on River Tables and tumblers. The Amazing Clear Cast is not as polishable as the Clear Urethane's used for turning.
In Florida care needs to be taken with humidity in the liquid state and some care with excessive heat. It can soften if constant exposure to heat, not melt but it could soften.
Redtail, please call here and talk to Don he is the table top expert and has used it to make many beautiful masterpieces personally and with local businesses.
Happy Thanksgiving!
Regards,
Carol
|
|