|
Post by mohairwig on Aug 17, 2017 16:20:59 GMT -5
I need to fabricate a funnel system to move milled powders from the mill jar to the storage jar . so rather than making a part to use as a mold, I am making a part to be a reusable tool I am trying to decide weather to use brush on or a combination of brush on and putty to make the parts , if I use the putty for the base will the brush on firmly adhere , or should I stick with one product ?
|
|
|
Post by carol - Alumilite Corp on Aug 23, 2017 7:45:56 GMT -5
I think that sticking with one product would best Mohairwig, as the putty is a platinum cure silicone and will inhibit against a tin cure system. We do not have a brush on silicone, without adding a thixotropic additive but that would be tin. I would stick with one type of silicone to save yourself a possible hiccup and/or headache.
Have a great day!
Warmest Regards,
Carol
|
|