|
|
Post by weirdturner on Jul 17, 2017 0:04:20 GMT -5
Not sure if it is possible and am looking for suggestions. My mold is a 6" ID pvc pipe 6" high and I will be embedding an object in it. Am using the clear resin so I can turn it after adding some translucent color. Will this even work or is there something else that I need to use?
|
|
|
|
Post by carol - Alumilite Corp on Jul 20, 2017 7:31:12 GMT -5
Weirdturner,
The best thing to use for that pour would be the Alumilite Clear Slow (12 minute open time). If you have the regular Clear it may very likely work for the application, however sometimes in large pours the heat of the resin can be in issue. Your dimensions aren't as large as some that have had had the heat issue possibly creating cracks or fissures in the cast resin. My recommendation would be to purchase the Alumilite Clear Slow if you you don't have the Alumilite Clear on hand.
Regards,
Carol
|
|
