|
Post by Linda Colucci on Aug 22, 2023 14:38:37 GMT -5
I poured several large trays (perhaps 12 x 24). For a variety of reasons I had to sand out certain spots. Sanding was recommended by your tech people. Now I have parts of the trays that looks "foggy" from the sanding. Should I cover these with more epoxy? I originally used Amazing Clear. Should use the same? or use the quick surface epoxy? Help! These pieces are due to my client on Thursday, August 31. and I still have to put the handles on.
Thanks for your help. Linda Colucci
|
|
|
Post by Admin on Aug 28, 2023 9:05:55 GMT -5
Hi Linda, I hope someone replied to you before now, but yes you can recoat the surface with either Amazing Clear Cast or Quick Coat. You would want to lightly sand the entire surface to ensure that you get a good bond with the new pour. After removing the sanding dust, it's helpful to wipe with a solvent like isopropyl alcohol. Thank you, Don
|
|