|
Post by riverpirate on Aug 30, 2018 9:38:19 GMT -5
Has anyone used the Trans 40 with a UV cure casting resin? Does it transmit enough UV light to cure any UV casting resins? There are a couple clear UV cure resins that I've used with success but the mold design is limited based on how much UV light you need to enter the mold. I like the UV resins because they cure quickly compared to the two part epoxies and they seam to be a bit less fragile.
|
|
|
Post by carol - Alumilite Corp on Sept 7, 2018 8:56:46 GMT -5
RiverPirate,
To my knowledge it has never been tested here with our AlumiUV, I will look into that for you see if someone can do a test here.
Regards,
Carol
Have a great weekend!
|
|