ken
New Member
Posts: 2
|
Post by ken on Aug 7, 2016 17:40:22 GMT -5
This is my first time using Water Clear. I'm trying to cast in a wood table top to simulate a small stream with pebbles. I degassed A and B independently and then again when mixed but still get bubbles. Does the wood need to be sealed first and do the pebbles need to be treated? Also, would Clear Cast be better for my application? The groove I am filling with the pebbles and resin is about 1 inch wide and 3/4 inch deep.
Thanks
|
|
|
Post by mike on Aug 8, 2016 10:03:31 GMT -5
Yes, to both parts. The wood/rocks should be sealed and the yes, the Amazing Clear Cast is a much better product for this application.
I'd still recommend degassing if you have the capability. And make sure the sealer you use is completely dry before pouring the Amazing Clear Cast.
Mike
|
|
ken
New Member
Posts: 2
|
Post by ken on Aug 9, 2016 10:01:26 GMT -5
Thanks Mike
|
|