|
Post by leandrial on Feb 12, 2016 22:45:36 GMT -5
Hi
The high strength 1 mix in a 1:1 ratio... can I change this ratio and ad less of the B-side to prolonge the curing time?? And if yes, how much, without ruining the over all curing of the rubber??
Best regards
|
|
|
Post by mike on Feb 17, 2016 9:01:13 GMT -5
The mix ratio is 10:1 by weight. It is not 1:1. The open time should be around 45 minutes. If you add less than 10% catalyst it will slow down. I would not recommend going any less than 100:8 mix ratio.
Mike
|
|