alan
New Member
Posts: 2 
|
Post by alan on Dec 15, 2015 9:43:21 GMT -5
What is the minimum pressure you recommend for casting Alumilite clear. I've been using 60psi but it really stresses my cheap pressure pot. Thanks.
|
|
|
|
Post by carol - Alumilite Corp on Dec 16, 2015 9:47:47 GMT -5
Alan,
The minimum amount of pressure we recommend is 35 PSI. I am told by many... as well as usage here that right round 45-50 seems to be the consensus.
Happy Holidays,
Carol
|
|
rickk
New Member
Posts: 1
|
Post by rickk on Dec 17, 2015 17:30:15 GMT -5
Do i have to use a pressure pot for casting the white or the clear? I am in a couple of casting groups and they tell me that i have to use a pressure pot with Alumilite. Yet I have seen videos where a pot was not used. I would like to get an answer from the people that actually make the product. Thank you very much
|
|
|
|
Post by carol - Alumilite Corp on Dec 18, 2015 11:06:49 GMT -5
Rickk,
The white you do not need to pressure cast, you can if you elect to. The Alumilite Clear, it is pretty much a must to have no bubbles, it is a bit thicker viscosity and a different formula than the white and regular resins.
Regards,
Carol
Wishing you and yours a Happy Holiday!
|
|
